Convert compatible dimmable lighting into smart, app-controlled lighting with the compact Sunricher SR-MT9041A-D. This in-wall trailing-edge phase dimmer controls compatible dimmable LED drivers, LED lamps, incandescent lamps and selected halogen lighting.
Connect through Matter over Thread for brightness, on/off and voice control using Apple Home, Google Home, Amazon Alexa or another compatible Matter platform. A compatible Matter controller and Thread Border Router are required.
Key features
- Matter over Thread connectivity
- Trailing-edge phase-cut dimming
- Up to 200W dimmable LED or 250W resistive load at 230-240V AC
- Two-wire installation without neutral or three-wire installation with neutral
- Active power and energy monitoring
- Adjustable minimum and start-up brightness
- Soft-start operation
- Momentary and selected toggle-switch support
- Compact 42 × 38 × 16mm in-wall design
Specifications:
Sunricher SR-MT9041A-D
Matter over thread Phase dimmer
Input/output: 100-240V AC, 50/60Hz
Output: 1 channel, 0.1–1.1A
IP20 for indoor use only
Compatibility: Confirm the connected lamp or driver supports phase-cut or trailing-edge dimming. Without neutral, a minimum 20W load at 240V AC is required; lower loads may need a compatible bypass.
Installation: This mains-voltage product must be installed by a qualified or licensed electrician according to local regulations.
