Hytronik HIM39RF-COM Wireless Conduit Mountable High Bay DALI Motion Sensor

The Hytronik HIM39/RF-COM is a conduit mountable, high-bay dual-technology motion sensor designed for independent DALI control with integrated RF wireless mesh capabilities. It utilises a "Dual Sense" architecture, combining High Frequency (5.8GHz microwave) and PIR technologies to minimise false triggers while maintaining high sensitivity in a warehouse environment.

Technical Specifications

• Operating Voltage: 120–277VAC, 50/60Hz.
• Control Interface: DALI output, supporting a maximum of 20 devices (max. 40mA).
• Dual-Tech Modes: 4 configurable modes (PIR only, HF only, HF+PIR for false-trigger immunity, or HF/PIR for maximum detection area).
• Detection Range: Maximum 18m (diameter) x 15m (height).
• RF Transmission: 868MHz (FSK); range up to 30m indoors and 50m outdoors.
• Environmental Protection: IP65 rated; operating temperature -20°C to +50°C

Key Functionalities

• Tri-Level Control: Supports a 100% ® dimmed light ® off sequence with selectable hold-times and stand-by periods.
• Intelligent Photocell: Built-in daylight sensor that can switch off fixtures even during occupancy if natural light exceeds the programmed threshold for >5 minutes.
• RF Grouping: Rapid commissioning via a 15-channel rotary switch or remote control HRC-11 (sold separately) for master/slave mesh configurations.
• Mounting Options: Conduit mountable.

Wiring Configuration

• The HIM39/RF serves as both a transceiver and a controller. It features a 4-wire connection to the DALI bus:
• Mains: L, N (Brown, Blue)13.
• DALI Bus: DALI+, DALI- (Yellow, Black)

Clearance item - pricing valid for current stock only